4 Liter UVPoxy Kit
DESCRIPTION
UVPoxy is a high-performance, two-component, water-clear epoxy system designed for tabletops, wood finishing, fluid art, and other applications requiring a clear, strong epoxy coating specifically designed to resist yellowing caused by the sun and other UV sources.
UVPoxy cures to a water-clear, high-gloss finish that is compatible with many substrates. It is formulated to have increased UV stability, moderate viscosity, and moderate system reactivity and is intended for use in quick-setting applications. While UVPoxy has been formulated to resist yellowing, it is not recommended for permanent outdoor applications.
The appearance of UVPoxy can be customized using EcoPoxy’s high-intensity Metallic Pigments and Liquid Color Pigments. Compatibility of the cured system with a variety of finishing methods, application techniques, and products ensures that desired custom finishes can be achieved.
UVPoxy Kit - 4 Liter
Coating Thickness
Up to 3.2mm (1/8”) per coat. Apply multiple coats for a thicker finish.
Mix Ratio by Volume (A:B)
1:1
Mix Ratio by Mass (A:B)
1.29:1
Working Time (in mold)
30 - 40 Minutes*
Tacky to Touch
4 - 10 Hours*
Set to Touch
10 Hours*
Full Cure
48 Hours*
Working Temperature
Resin, mold, and workspace temperatures should be 20-25°C (68-77°F)
Storage Temperature
15-25°C (59-77°F)
Clean Up
Isopropyl/Denatured Alcohol or Warm Soapy Water
Shelf Life
Two years in unopened container, 3 months once opened
*Times are based on a 1.6mm (1/16”) thick coating. Individual project times may vary depending on coating thickness, ambient temperature, and humidity.
Mixing
In a clean, dry container combine (by volume) 1 part resin with 1 part hardener and mix thoroughly for 2-3 minutes. Add Liquid, Metallic, or Glitter pigments as desired and mix until evenly dispersed.
Application
Working area should be clean, dry, and free of dust. Settling dust can cause blemishes on the glossy surface. Pour UVPoxy onto the prepared surface and spread evenly. Use of a V-notched spreader is recommended to achieve a uniform finish at the desired thickness. A light pass with a torch can help release bubbles at, or near, the surface. UVPoxy can be applied up to 3.2mm thick (1/8”) per coat, using as many layers as needed to achieve the desired thickness. For best adhesion between layers, wait until the first layer is tacky to touch to apply another layer. If the first layer is already fully set to touch, sand with 220 grit sandpaper and wipe down before applying another layer. Recommended for indoor applications only.